With high performance hydraulics the M100GX/M110GX has a 4285kg lifting capacity and the M126GX/M135GX has a 5200kg lifting capacity (both at 610mm behind the lift point) with independent hydraulic PTO (540rpm and 1000rpm) with quick and easy hitching of a large range of implements.
Tight headland and farmyard turns effortlessly achieved with Kubota's bevel-gear front axle and Bi-Speed turn feature.
With the press of a button, you can now pre-set and save up to two frequently used engine RPM settings. So whether you have a favourite setting for PTO work, front loader work, or changing directions, your Kubota runs just the way you want, without having to adjust the throttle.
When the front wheels exceed a turning angle of about 35°, Kubota’s Bi-Speed Turn rotates the front wheels at a rate of speed nearly twice that of the rear wheels. The result is a smoother, tighter turn, allowing you to turn into rows on your first attempt, or to easily manoeuvre around livestock yards or buildings.
To ensure faster loader cycle times and instantaneous implement response, Grand X tractors have high-flow, 131.3 litres per minute (M100GX/M110GX) and 132 litres per minute (M126GX/M135GX) hydraulic pump.
Two remote valves come standard—a SCD/ Self-Cancelling Detent and FD/Float-type valve. The maximum installation is 4 valves. All rear remote valves have individual flow control that allows the hydraulic flow to be adjusted independently for up to 4 auxiliary control valves, so each valve together or the valves and 3-point hitch can be operated simultaneously.
The oil flow rate is easily regulated by adjusting each flow control dial.

 The M135GX FS includes a 3 stage front suspension system, improving performance and operator comfort both on and off road.